DIY - Rustic Wine Bottle Wall Sconce

DIY projects are usually fun especially when they don't break the bank. This wall sconce cost less then $10.00 and I also was also able to have a glass of wine after it was completed. 

  Follow steps below:

Follow steps below:

  Shopping list:   1) wine bottle - empty and cleaned out  2) 2"x8' wood cut into 2" x 18" pieces  3) 3/8" ceiling flange  4) 12x1 - 1/4  (2) wood Screws  5) 3/8" Threaded Rod - 12" piece cut into 3" pieces  6) drill - not necessary but useful  7) stain & sealer  8) sponge brushes  9) clean rag

Shopping list:

1) wine bottle - empty and cleaned out

2) 2"x8' wood cut into 2" x 18" pieces

3) 3/8" ceiling flange

4) 12x1 - 1/4  (2) wood Screws

5) 3/8" Threaded Rod - 12" piece cut into 3" pieces

6) drill - not necessary but useful

7) stain & sealer

8) sponge brushes

9) clean rag

  Wood can be cut down to (5) 18" pieces at Home Depot.

Wood can be cut down to (5) 18" pieces at Home Depot.

  Drill (2) holes to hold the ceiling flange.

Drill (2) holes to hold the ceiling flange.

 After sanding you can put on a few coats of stain. Once that dries, it's time to seal the wood. Wait 24 hours and then you can start assembling the sconce.   Have fun!

After sanding you can put on a few coats of stain. Once that dries, it's time to seal the wood. Wait 24 hours and then you can start assembling the sconce.

Have fun!